Easy up and easy down is the melody for the Peel & Stick wallpaper as long as you have followed the application guidelines and pasted it onto recommended surfaces.

Generally, no damage occurs if applied properly and removed with care.

Have in mind:

• Smooth, painted walls (especially semi-gloss or satin finishes) make removal easier.
• A previous wallpaper, matte or flat paint may absorb adhesive, making removal tricker.
• Textured walls can prevent full adhesion making the wallpaper easy to remove.

• Textured surfaces
• Structured surfaces
• Untreated plasterboard/drywall
• High-gloss painted walls
• Rooms with significant temperature changes and varying humidity, such as bathrooms
• Ceilings

For the self-adhesive wallpaper we especially recommend a smooth and clean surface.

• You must give freshly painted walls 4-6 weeks to cure fully
• Matte, eggshell, satin and semi-gloss finishes that give your walls a smooth surface are recommended
• Pay attention to the type of roller used for the primer coat to ensure that the surface does not become textured, which could hinder the adhesion of the wallpaper
• Ensure the colour is uniform and doesn't differ significantly from your chosen wallpaper for best results
• It is possible to apply a peel & stick wallpaper over an existing wallpaper if the wall is dry, clean and smooth

The Peel & Stick Wallpaper is a non-woven wallpaper made of PVC-paper with Sandberg Mattic matte, premium finish. The adhesive is also water-basses, VOC and solvent free.

The Peel & Stick wallpaper should be installed within six months. The wallpaper should be stored in normal conditions and at normal temperatures without sun exposure.